Custom
Nebulizer Parts
AFI Industrial Co., Ltd. produce nebulizer parts, support customization and rapid proofing services to help you reduce costs and improve market competitiveness.
About the Nebulizer Parts
We offer atomizer parts nozzles, made of 316L stainless steel, suitable for the atomization of daily medical liquids, with a stable output of droplets between 3 and 5 microns in size. It has a built-in diversion channel design, under the working pressure of 0.3MPa, the atomization efficiency can reach 98%.
The piezoelectric driver adopts a 0.2 mm thick titanium alloy substrate and piezoelectric ceramic composite structure, and the vibration frequency is accurately controlled at 1.7MHz. After the actual test, in the case of continuous operation for 8 hours, the frequency drift will not exceed 0.3%. In order to ensure the normal operation in high humidity environment, the electrode part uses a double coating process to ensure stable electrical conductivity.
This valve set is very responsive and takes only 15 milliseconds to effectively prevent liquid leakage. After testing, under continuous working condition, the loss of liquid medicine per hour is less than 0.05 ml. Moreover, the valve body is compatible with a wide range of media from pure water to high concentration suspension. Specially designed flow channels allow liquids with viscosity up to 200cP to pass smoothly.
All of our nebulizer part interfaces support ISO standard thread specifications with assembly tolerances within 0.002 mm. There are three surface treatment options for metal parts: conventional passivation for indoor use, micro-arc oxidation coatings to enhance the weather resistance of outdoor equipment, and PVD coatings specifically for high-frequency contact disinfection scenarios. Modular design between components allows you to quickly replace and repair.
Custom Nebulizer Parts Service
AFI Industrial Co., Ltd. provides customized nebulizer parts, whether it is a special size, specific materials or other personalized needs, we can flexibly respond to meet your product development and enhance market competitiveness.
Can be customized to any of your drawings or needs, we respond quickly within 2 hours to support the smallest order of 1 piece or mass production to facilitate your testing and verification, while meeting your large order needs and reducing your downtime.
Provide one-stop procurement services to help customers simplify the supply chain, 3-15 days delivery, shorten your research and development time, reduce production costs.
Nebulizer Parts Production
The stainless steel nozzles of nebulizer parts of AFI Industrial Co., Ltd. adopt a five-axis milling process, equipped with 0.3mm carbide tools and micro-lubrication technology, and the hole diameter accuracy can reach ±0.008mm. Help customers achieve stable atomization effect during use, reduce liquid waste, extend nozzle life and lower replacement frequency.
Are you also facing the problem of high maintenance costs for nebulizer parts? The titanium alloy substrate of our piezoelectric element is first cut by slow wire, and then ground on both sides with a 0.1mm ultra-thin grinding wheel. The thickness fluctuation is controlled within ±0.003mm. The piezoelectric ceramic plate was cut by laser, and the edge damage was less than 5μm. This precise assembly process makes the drive components more reliable, enabling the equipment to operate stably for a long time and reducing the maintenance costs for customers.
In addition, our aluminum alloy fluid components undergo micro-arc oxidation after processing, generating a 20μm thick ceramic layer in 15% silicate electrolyte, microhardness up to HV900, and salt spray resistance test for more than 500 hours. Solenoid valve moving iron core adopts vacuum quenching process, surface hardness HRC60±2, with fine grinding, moving surface roughness Ra0.4μm. These processes greatly enhance the durability of parts, help customers cope with complex operating conditions, and reduce downtime due to corrosion or wear.
After all parts are finished, we will carry out coordinate measurement (accuracy ±1μm), helium mass spectrometry leak detection (sensitivity 1×10⁻⁹Pa·m³/s) and simulation test. The strict inspection system provides customers with reliable quality assurance of nebulizer parts, ensures that the equipment can operate stably in different environments, and reduces the risk of machine failure caused by parts problems.
Nebulizer Parts Quality
The product quality is guaranteed by AFI Industrial Co., Ltd. The fundamental basis on which a company relies for survival and development. We strictly control the quality in every link from the purchase of raw materials, the production of semi-finished products, surface treatment, to the shipment of finished products to ensure that all the products received by customers are qualified.
Materials Quality Control
Select materials from qualified suppliers for nebulizer parts processing.
Accuracy and Tolerance
In strict accordance with the customer's drawings, the accuracy is controlled within the tolerance range.
Performance Index
Quality department to do a good job of control, and strive to meet customer performance indicators.
Durability
Do a good job of surface treatment after processing, so that the nebulizer parts have good durability.
Compatibility
Make sure the nebulizer parts are compatible with other accessories according to the drawing.
Company Strength
AFI Industrial Co., Ltd is a private investment corporation that is situated in Dongguan City, Guangdong Province of China. We provide our customers with CNC turning, CNC milling, stamping, sheet metal, bending, and other services for custom parts. Our products are widely applied in areas like mechanical equipment, aerospace, aviation, electric appliances, medical care, instruments, IT, AI products, etc. Our goal is to satisfy customers and offer them better and more convenient service.
As an integrated industrial and trade enterprise, we have no middlemen between us and foreign customers, which reduces the customer's procurement links and the customer's procurement costs, and truly achieves a win-win situation for both buyers and sellers.
We have professional engineering personnel to provide advanced and timely technical support, excellent production personnel and inspection personnel to control the product quality of each production link, and well-equipped inspection equipment, which is enough to enable us to produce high-quality products to meet the various needs of different customers.
We have a professional industrial product design team to help customers develop and design new products, test and proof, and help customers quickly achieve mass production of new products and occupy the market.
We have many loyal logistics companies, that have opened up a smooth transportation channel between us and our customers, ensuring that each batch of goods can be delivered to customers safely, timely, and intact.
AFI Industrial Co., Ltd. adheres to the purpose of serving customers and always puts the interests of customers first. Customer needs are our goal.
Shipping
Packaging
We will select the appropriate packaging according to different products, and clearly mark it. So that it can be counted and used conveniently when you receive it. By sea, by air, or by land, whatever way you chase, we will prepare everything perfectly for you!
Transportation
We will choose a transportation method that saves costs and ensures timeliness for our customers based on the quantity, weight, and volume of the packaging of the transported products. No matter which mode of transportation is adopted, we will monitor the entire transportation process to ensure that the goods are delivered to our customers intact.
Our Promise
Cost
Paid production process with no markup
Quality
100% full inspection using CMM before shipment
Delivery Time
3-15 days delivery depending on quantity
Service
Fast response within 2h, fast quotation within 4h
Contact Us
Your satisfaction and trust is our eternal pursuit, let us work together to create excellent quality and service, witness every moment of success.