Custom
Drive Wheelchair Parts
AFI Industrial Co., Ltd. precision consistency, support customization and rapid proofing services to help you reduce costs and improve market competitiveness
About the Drive Wheelchair Parts
In the production of wheelchairs, have you also encountered drive gear sets that do not fit the motor? Bearing joints with a year to break, after-sales complaints can not be pressed?
For transmission adaptation, AFI Industrial Co., Ltd. provides 17-4PH stainless steel planetary gear set, measured to match 23 mainstream wheelchair motor models, modulus coverage 1.5-3.0, overload 15% continuous teeth, so that your inventory turnaround cycle can go from 45 days to 7 days.
The 7075-T651 shaft assembly of our load-bearing joint has been tested 100,000 times under 20kN load, and the deformation is stable within 0.12mm, and the self-lubricating bushing reduces the stuck rate in the dust environment by 67%. Four kinds of thread matrix layout are reserved for the motor mounting base, the flatness is 0.02mm/m², the assembly time is reduced by 40%, and the heat sink design reduces the motor burn rate by 12%. Help you save on maintenance costs and reduce downtime.
Our handwheel brake cams use a hard chrome coating with a profile error of 0.015mm or less, and with non-slip springs, the braking response delay is reduced from 0.8 to 0.3 seconds at -20 ° C, so that you can avoid the risk of slope misoperation.
Contact us today to learn more about drive wheelchair parts solutions that can help you reduce assembly problems, lower after-sales rates, and shorten development cycles!
Custom Drive Wheelchair Parts Service
AFI Industrial Co., Ltd. provide customized drive wheelchair parts, whether it is a special size, specific materials or other personalized needs, we can flexibly respond to meet your product development and enhance market competitiveness.
Can be customized to any of your drawings or needs, we respond quickly within 2 hours to support the smallest order of 1 piece or mass production to facilitate your testing and verification, while meeting your large order needs and reducing your downtime.
Provide one-stop procurement services to help customers simplify the supply chain, 3-15 days delivery, shorten your research and development time, reduce production costs.
Drive Wheelchair Parts Production
AFI Industrial Co., Ltd. drives wheelchair parts drive gear set 17-4PH stainless steel blank, after pre-aging treatment to turn the tooth shape, the cumulative error of tooth spacing from the industry common 0.02mm to 0.008mm, to help you improve production efficiency, improve product quality stability.
We adopted CNC turning for one-time forming and switched the keyway to precision milling, avoiding the 0.01mm coaxiality deviation caused by double clamping. The precision machining of complex profiles ensures an accurate fit and reduces drive wheelchair part assembly problems for you.
Have you ever had your brake CAM wear out with dents within half a year? Our hard chromium plating for brake cams is not a simple immersion - 0.5μm oil film is removed by ultrasonic cleaning before painting, and the cathode moves at a speed of 2m/min during the plating process to keep the chromium layer thickness deviation less than 3μm. It effectively helps you improve the surface hardness and wear resistance of drive wheelchair parts and extend the service life of the parts.
Recently, we have been dealing with oil storage problems in self-lubricating bushings. The traditional method is to drill oil holes, but it is easy to accumulate ash. We changed the laser on the surface of the copper alloy to burn 0.2 mm micro pits, the density is adjusted to about 130 per square centimeter, the installed test found that the lubrication life was extended from half a year to two years.
Contact us today to learn more about drive wheelchair parts production process!
Drive Wheelchair Parts Quality
The product quality is guaranteed by AFI Industrial Co., Ltd. The fundamental basis on which a company relies for survival and development. We strictly control the quality in every link from the purchase of raw materials, the production of semi-finished products, surface treatment, to the shipment of finished products to ensure that all the products received by customers are qualified.
Materials Quality Control
Select materials from qualified suppliers for drive wheelchair parts processing.
Accuracy and Tolerance
In strict accordance with the customer's drawings, the accuracy is controlled within the tolerance range.
Performance Index
The quality department to do a good job of control, and strive to meet customer performance indicators.
Durability
Do a good job of surface treatment after processing, so that the drive wheelchair parts have good durability.
Compatibility
Make sure the drive wheelchair parts are compatible with other accessories according to the drawing.
Company Strength
AFI Industrial Co., Ltd is a private investment corporation that is situated in Dongguan City, Guangdong Province of China. We provide our customers with CNC turning, CNC milling, stamping, sheet metal, bending, and other services for custom parts. Our products are widely applied in areas like mechanical equipment, aerospace, aviation, electric appliances, medical care, instruments, IT, AI products, etc. Our goal is to satisfy customers and offer them better and more convenient service.
As an integrated industrial and trade enterprise, we have no middlemen between us and foreign customers, which reduces the customer's procurement links and the customer's procurement costs, and truly achieves a win-win situation for both buyers and sellers.
We have professional engineering personnel to provide advanced and timely technical support, excellent production personnel and inspection personnel to control the product quality of each production link, and well-equipped inspection equipment, which is enough to enable us to produce high-quality products to meet the various needs of different customers.
We have a professional industrial product design team to help customers develop and design new products, test and proof, and help customers quickly achieve mass production of new products and occupy the market.
We have many loyal logistics companies that have opened up a smooth transportation channel between us and our customers, ensuring that each batch of goods can be delivered to customers safely, timely manner, and intact.
AFI Industrial Co., Ltd. adheres to the purpose of serving customers and always puts the interests of customers first. Customer needs are our goal.
Shipping
Packaging
We will select the appropriate packaging according to different products, and clearly mark it. So that it can be counted and used conveniently when you receive it. By sea, by air, or by land, whatever way you chase, we will prepare everything perfectly for you!
Transportation
We will choose a transportation method that saves costs and ensures timeliness for our customers based on the quantity, weight, and volume of the packaging of the transported products. No matter which mode of transportation is adopted, we will monitor the entire transportation process to ensure that the goods are delivered to our customers intact.
Our Promise
Cost
Paid production process with no markup
Quality
100% full inspection using CMM before shipment
Delivery Time
3-15 days delivery depending on quantity
Service
Fast response within 2h, fast quotation within 4h
Contact Us
Your satisfaction and trust is our eternal pursuit, let us work together to create excellent quality and service, witness every moment of success.